0086-0574-18800576204
Room 2106, Rm. (21-1), Huangjin Bldg., Huaxing, Baisha Road Street, Ningbo, Zhejiang, China (Mainland)
MIC- 500L cosmetic cream making machine jam making machine tomato sauce making machine vacuum homgenzier mixer with ce
INTRODUCTION
Vacuum emulsifying machine consists of vacuum homogeneous emulsifying machine, heating system, mixing system, vacuum system, electric lifting system, operation control cabinet, piping system(oil tank and water tank optional). It is the most suitable equipment to produce high-grade skin care creams and other cream products.
Body Material:
Inner wall: stainless steel 316
Jacket and outer layer: stainless steel 304
Both inner and outer are polished and handled by special light treatment.
Material: Inner wall is made by 304 stainless steel, jacket and outer layer are made by 304 stainless steel, inner and outer are polished, the surface handled by special light treatment.
Heating system: interlayer electric heating power 8KW, the outer layer covers by asbestos to insulate heat, reducing heat lost and avoiding scalding employees.
Mixing system: both toil tank and water tank assemble disperser of 0.75KW, to make the water and oil heated more quickly and evenly.
100L oil and water pot:
Homogenizer 520L
PN | 520L vacuum emulsifying mixer | ||
Capacity | Design volume:650L, working capacity:520L | ||
Kettle Cover | Liquid(particle)inlet, sunk material inlet, air inlet with filter, inspect light and sight glass, 2 PCS CIP drencher head, vacuum port, pressure meter(1 to -0.1 bar), pressure clamp | ||
Mixing pot |
Material | Inner layer: SUS316L thickness: 6mm | |
Middle layer: SUS304 thickness: 5mm | |||
Outside layer: SUS304 thickness:3mm | |||
configuration | Bottom material exhaust, size: DN50/32 | ||
Temp. sensor (0-199℃) | |||
Electrical heating: 8kw, cooling water inlet | |||
Stirring system |
Homogenizer | 1.Material: SUS316L; standard homogenizer 2. Power: 11kw/380/50Hz; RPM:2800R/Min | |
Stirring scrap and middle stirring | Material: SUS316L,Scrap material: PTFE | ||
1. Stirring scrap and middle stirring use the same motor 2,Power:4kw/380V/50Hz;RPM:0~45r/min(Frequency control) 3. Stirring scrap and middle stirring rotating the opposite direction | |||
Safety: 1. During stirring, the cover cannot open, 2. Cover lift cannot stirring. | |||
Vacuum system | 1. Vacuum pump: water recycle, power 3kw/380V/50Hz 2. With pressure sensor (during vacuum condition, hydraulic cannot open) | ||
Heating method | Jacket steam heating | ||
Exhaust method | Hydraulic doom and bottom exhaust or positive pressure exhaust material | ||
Pressure | Pressure in the pot during working: -0.090 Mpa; Jacket working pressure:0.2 Mpa | ||
Control box | SUS304 , 1.2mm thickness | ||
Dimension | 2700mm×1350mm×3230~4700mm (after lifting size) | ||
Shelf is SS304 | |||
Commissioning | Our factory will send people for commissioning | ||
Spare parts | One year spare parts and tools | ||
Guarantee | One year | ||
Using life | More than 15 years | ||
Water tank | Volume 500L , material SUS316L inner tank diameter: 800mm Inner wall thickness: 6MM, Jacket material: SUS304, Jacket diameter: 900mm, Jacket wall thickness: 5MM Outer layer material: SUS304, Outer tank diameter: 3MM Mixing motor power: 1.1Kw, Mixing speed: 960 Rpm Electrical heating power: 18Kw | ||
Machine detail
Terms & Conditions:
Payment: T/T 30% in advance, balance paid before shipment, video inspection or person inspection before shipment
Delivery: 25-30 days after receiving the deposit.
Packing: wooden case
Validity: 1year
Sales After Service:
Guaranty: One Year
One set of consumable accessories will be provided with the machine.
Before delivery, we will adjust the machine to fit for your product.
Any question, you can mail/call us at any time. And our most experienced engineers is assigned to give consulting service, and always available for dispatching abroad.
All spare parts are always available for delivery.
Manual is in English.
Installation/ Training:
The installation can be provided by the MIC Company. It must be after shipment and machine has arrived and factory must be ready equipped with all necessary requirements before booking installation with MIC Company. Our engineers will come to the site for the complete and final installation. During the installation session, a one day training course will be provided to the customer to the customer for operation and maintenance procedure. The purchase at US$70/person/day plus all local transportation, accommodation, air tickets (round trip). Day charges include travel day.
Thank you for attention.
Our factory is located in Changzhou near Tai Lake. 500 meters away from Wuxi, the location is beautiful and transportation convenient. We are specialized in designing and manufacturing of art equipments for pharmaceutical medicine, food, biology, chemical and petroleum industries.
Focused on technology and quality, we always dedicate ourselves to providing reliable high efficient products to our clients. Machines such as emulsification machines, paste machines, mixers, capsule filling machines, pressing machines, the grinder, the sealing machines etc., all have an attractive appearance and innovative technology.
Parts warehouse
